SCT U34 SIM SPF 010 - SIM V3 - Functional Specifications (2003.07.21)
1 SCOPE
1.1 Introduction
1.2 REFERENCES
1.3 GLOSSARY
2 SIM CARD SPECIFICATIONS
2.1 PHICICAL CHARACTERISTICS
2.1.1 Characteristics of the plastic holder
2.1.2 Positioning of the contacts
2.1.3 Qualification criteria
2.2 Electrical Characteristics
2.2.1 5V Electrical Characteristics
2.2.2 3V Electrical Characteristics
2.3 DISPLAYS
3 SIM CARD COMMUNICATION CONCEPTS
3.1 RESET OF THE CHIP
3.2 COMMUNICATION PROTOCOL
3.2.1 Principle for sending commands to the card
3.2.2 Card Answer rules: Coding of the status word
4 FILE SYSTEM
4.1 CHARACTERISTICS
4.2 LOGICAL FILE STRUCRURE
4.3 FILES ARCHITECTURE
4.3.1 Master File (MF)
4.3.2 Dedicated File (DF)
4.3.3 Elementary Files (EF)
5 GLOBAL SECURITY SCHEME
5.1 Card life cycle and associated security mechanisms
5.1.1 Life cycle definition
5.1.2 Life cycle management
5.1.3 Security transport
5.2 ACCESS CONDITIONS
5.2.1 Authentication level
5.2.2 Functions protections
5.2.3 Access conditions
5.2.4 Status
5.3 KEY/CHV FILES
5.3.1 EFKey Op
5.3.2 EFCHV
5.3.3 Special case of the KI
5.4 MEMORY MANAGEMENT
5.4.1 EEPROM saving mechanisms
5.4.2 Memory Back-up mechanism
5.4.3 Memory integrity management
6 POST ISSUANCE COMMAND SET
6.1 SELECT
6.1.1 Definition and Scope
6.1.2 Remarks
6.1.3 Command Message
6.1.4 Data Field Returned in the Response Message
6.2 STATUS
6.2.1 Definition and Scope
6.2.2 Command Message
6.2.3 Data Field Returned in the Response Message
6.3 GET RESPONSE
6.3.1 Definition and Scope
6.3.2 Command Message
6.3.3 Data Field Returned in the Response Message
6.4 READ BINARY
6.4.1 Definition and Scope
6.4.2 Command Message
6.4.3 Data Field Returned in the Response Message
6.5 UPDATE BINARY
6.5.1 Definition and Scope
6.5.2 Command Message
6.5.3 Data Field Sent in the Command Message
6.6 READ RECORD
6.6.1 Definition and Scope
6.6.2 Command Message
6.6.3 Data Field Returned in the Response Message
6.7 UPDATE RECORD
6.7.1 Definition and Scope
6.7.2 Command Message
6.7.3 Data Field Sent in the Command Message
6.8 SEEK
6.8.1 Definition and Scope
6.8.2 Command Message
6.8.3 Data Field Sent in the Command Message
6.8.4 Data Field Returned in the Response Message
6.9 INCREASE
6.9.1 Definition and Scope
6.9.2 Command Message
6.9.3 Data Field Sent in the Command Message
6.10 VERIFY CHV
6.10.1 Definition and Scope
6.10.2 Command Message
6.10.3 Data Field Sent in the Command Message
6.11 CHANGE CHV
6.11.1 Definition and Scope
6.11.2 Command Message
6.11.3 Data Field Sent in the Command Message
6.12 DISABLE CHV
6.12.1 Definition and Scope
6.12.2 Command Message
6.12.3 Data Field Sent in the Command Message
6.13 ENABLE CHV
6.13.1 Definition and Scope
6.13.2 Command Message
6.13.3 Data Field Sent in the Command Message
6.14 UNBLOCK CHV
6.14.1 Definition and Scope
6.14.2 Command Message
6.14.3 Data Field Sent in the Command Message
6.15 INVALIDATE
6.15.1 Definition and Scope
6.15.2 Command Message
6.16 REHABILIDATE
6.16.1 Definition and Scope
6.16.2 Command Message
6.17 RUN GSM ALGORITHM
6.17.1 Definition and Scope
6.17.2 Command Message
6.17.3 Data Field Returned in the Response Message
6.18 SLEEP
6.18.1 Definition and Scope
6.18.2 Command Message
6.19 Status conditions returned by the card
6.19.1 Responses to commands which are correctly executed
6.19.2 Memory management
6.19.3 Referencing management
6.19.4 Security management
6.19.5 Application independent errors
6.19.6 Commands versus possible status responses
7 MULTISUBSCRIPTION MANAGEMENT
7.1 IHM 0 (SIM v3.7)
7.1.1 Object
7.1.2 DESCRIPTION
7.2 IHM 1 (SIM v3.7)
7.2.1 Entering the PIN number
7.2.2 Changing the PIN number
7.2.3 Unblocking the PIN
7.2.4 About switching subscriptions using commands involving CHV1 presentation
7.2.5 Example
7.3 IHM 2 (SIM v3.7)
7.3.1 Entering the PIN number
7.3.2 Changing the PIN number
7.3.3 Unblocking the PIN
7.3.4 About switching subscriptions using commands involving CHV1 presentation
7.3.5 Example
8 PROPRIETARY COMMAND SET
8.1.1 DIR
8.1.2 CHECK
8.1.3 READ INFO
8.1.4 VERIFY ADM
9 FILE STRUCTURE EXAMPLE
10 PROPRIETARY FILES
10.1.1 Configuration file
10.2 List IMSI file
10.3 Ki file
|